เทคนิคการใช้ปุ่ม G# เพื่อช่วยให้เล่นง่ายขึ้น / How Your G# Mechanism Can Get You Around the Horn Way Faster

เทคนิคการใช้ปุ่ม G# เพื่อช่วยให้เล่นง่ายขึ้น
เขียนโดย   Sam Sadigursky
แปลโดย ปิยพล อัศวกาญจนกิจ

 

แซ็กโซโฟนเป็นเครื่องดนตรีที่ไม่ได้เปลี่ยนแปลงไปมากนักนับตั้งแต่ Adolphe Sax ได้สร้างขึ้นมา แต่โชคดีที่มีเทคนิคบางอย่างที่ช่วยให้เราเล่นได้ง่ายขึ้น ถ้ารู้วิธีการใช้มัน

อย่างแรกนั้นถ้าคุณมองที่เครื่องของคุณ จะเห็นได้ว่า G# เป็นหนึ่งในไม่กี่ปุ่มที่จะปิดเวลาที่ไม่ได้ใช้ ดังนั้นก็เป็นเหตุผลที่ว่า ทำไมมันถึงชอบติดเวลาที่ต้องการใช้

ถ้าคุณกดปุ่ม G# ค้างไว้ขณะที่ กดปุ่มที่อยู่บริเวณนิ้วชี้ นิ้วกลาง และนิ้วนาง มือขวา จะทำให้นวมตรง G# ปิดลงมา ตอนนี้ลองดูที่นิ้วก้อยมือซ้ายไม่ว่าคุณจะกดปุ่ม C#, B, Bb ทุกปุ่มทำให้นวมบริเวณ G# เปิดออก (ถ้าคุณใช้เครื่องที่ผลิตก่อนปี 1930 อาจจะไม่มีระบบนี้)

 

เปิดประตูสู่โลกใหม่

บางคนอาจจะมองว่ากลไกตัว G# ที่กล่าวไปแล้วไม่ค่อยจะจำเป็นและไม่สนใจ แต่ที่จริงแล้วถ้าเรารู้วิธีใช้มันจะช่วยประหยัดแรง อีกทั้งช่วยในเรื่องการเล่นได้เยอะมาก

อย่างแรก ลองเล่น Trill ระหว่าง F# กับ G# โดยขณะที่เล่น ให้กด G# ค้างไว้ จากนั้นลองเปลี่ยนเป็น Trill จากโน้ตอื่นบ้าง เช่น D-G#, D#-G#, E-G#, F-G# จะเห็นได้ว่าทุกโน้ตที่กล่าวมานี้ เราไม่จำเป็นต้องยก G# ขึ้นเลยในขณะที่เล่น

 

ตัวอย่างอื่น ๆ  

ทีนี้ลองมาดูว่าจะใช้เทคนิคนี้กับสเกลได้อย่างไร ก่อนอื่นลองเล่นโน้ตห้าตัวแรกของสเกล E Major ซึ่งถ้าเราเล่นเร็วจะยิ่งเห็นได้เลยว่ากลไกตัว G# นั้นช่วยเรามากขนาดไหน คราวนี้ลองเล่นโดยกดตัว G# ค้างไว้ (example 2)

ต่อมาลองเล่น ตัวอย่างที่ 3, 2, และ 1 ซึ่งอยู่ในบันไดเสียง F# minor และแน่นอน กด G# ค้างไว้เช่นกัน

แล้วจะใช้กับ arpeggio ได้มั้ย (ลองดู example 4)

เมื่อคุณซ้อมจนรู้สึกคุ้นเคยกับมันแล้ว คุณจะพบว่าไม่ว่าจะเล่นบันไดเสียงอะไรที่มีตั้งแต่ 3 sharp ขึ้นไป คุณจะต้องกด G# ค้างไว้เสมอ

ส่วนในกรณีที่เล่น G# สลับกับโน้ตเสียงต่ำก็สามารถดูได้ตามตัวอย่าง 5, 6, และ 7

 

 

How Your G# Mechanism Can Get You Around the Horn Way Faster

By Sam Sadigursky

Not all that much has changed since Adolphe Sax first invented the instrument that bears his name, but fortunately there have been a few small technical improvements that can make your musical life much easier if you know how to use them. This will be the first of several columns on these specific mechanisms.

 

Introducing Your Pinkie’s New Best Friend

So first, let’s give you all a short introduction. If you look at your saxophone, you’ll see the pad that comes up when you finger the G# key is one of the only pads on the main stack of the horn which stays closed when not being activated. (This is the reason that it is so prone to sticking.. more on that in one of my upcoming columns).

Now, if you press any key of the right hand down while continuing to press the G# key, you’ll see that pad come back down along with those keys. This is known as the articulated G# mechanism. Now, notice how if you press the keys for the low C#, B, and Bb with your left hand pinky without pressing down anything in the right hand, the G# pad will come up. This is known as the tab mechanism, and it allows you to play a G# using any of those keys in the left-hand pinky stack. (Note: if you’re playing a saxophone made before about 1930, you might not have the tab mechanism on your horn. It’s very easy for a repairman to install it, so ask your technician if he or she knows how to do so).

 

A Whole New World

Now, I know that to many of you this might not seem like a big deal, but once you actually understand these two mechanisms, they can save your fingers a lot of unnecessary work and make a lot of things easier, smoother and faster.

Let’s first start with the articulated G# mechanism. First, try to trill from F# to G#. Notice that thanks to this mechanism, you can hold down the G# key the whole time. Now this applies to trills to G# from D, D#, E, F, and low C as well. (see example below #1). You don’t need to lift the G# key to get to the other note.

 

Some Examples

Now let’s talk about how we can use it with simple scales and passages that derive from them. Let’s play the first five notes of an E Major scale up and down. If you try to do this fast, you’ll notice just how much extra work the tab mechanism saves you by allowing you to keep the G# key down through the whole passage. (see example 2 below)

Now try playing 3-2-1 in F# minor very fast, also pressing the G# key down the whole time. (see example 3)

And how about some basic arpeggios using this mechanism? (see example 4)

Once you get comfortable using this mechanism, you’ll find that if you’re playing anything fast in a key that has three sharps or more in the key signature, you can leave the G# down almost the entire time.

 

Practical Uses for the Tab Mechanism

The most obvious uses for this would be some trills from our lowest notes to G#, or some passages that switch fast from one note to the other. (see example 5)

And how about some basic arpeggios, you say? (see example 6)

And you might even find some passages where you can take advantage of both mechanisms.